MTDCNC Podcast - Manufacturing Technology

Your source for the latest in manufacturing news and technology worldwide.

Feature on MTDCNC

Looking for something in MTDCNC Podcast - Manufacturing Technology?

MTDCNC Podcast…eu
Should he stay or should he go? MTDCNC Uncut tackles politics, GDP and the mood in manufacturing

The latest episode of MTDCNC Uncut has arrived, and this time the conversation moves far beyond machine tools and factory floors. Recorded candidly in the studio, the MTDCNC team dive into a wide-ranging discussion covering UK politics, the economy, manufacturing confidence and the latest GDP figures dominating today’s headlines. With pressure mounting on Prime Minister Sir Keir Starmer, the conversation naturally turns towards leadership, business confidence and whether the UK economy is finally beginning to show signs of momentum. According to figures released today, UK GDP grew by 0.6% during the first quarter of 2026, outperforming many expectations and providing

MTDCNC Podcast…na
Torneado de alto rendimiento: grados, rompevirutas y productividad con Kennametal

En el primer episodio del podcast de MTDCNC en español, Ana Fernanda Meléndez tuvo la oportunidad de conversar con Francisco Cepeda sobre algunos de los temas más importantes en el mundo del torneado y el maquinado de metales.En este episodio hablamos sobre:🔧 Selección de grados para mejorar rendimiento y productividad🔧 Aplicaciones en aceros inoxidables 304 y 316🔧 Diferencias y usos de KCU10B, KCU25B y KCS10B🔧 Maquinado de superaleaciones como Inconel, titanio y Waspaloy🔧 La importancia de los rompevirutas en el proceso de mecanizadoUna conversación muy técnica, pero también muy aterrizada a los retos reales que viven los talleres y fabricantes

MTDCNC Podcast…na
160 years of shaping how the world actually moves

“Some companies make parts, a few make history – and then there’s Gleason.” For over a century and a half, Gleason has been at the centre of gear technology. In this podcast, Paul, VP of Sales at Gleason, shares how the industry has moved from mechanical systems to fully connected machines – where design, cutting, and inspection all speak to each other in real time. We’re talking micron-level precision, laser inspection, and systems that don’t just make parts. They actually improve them. Watch the full episode to see how Gleason continues to push the industry forward.

EPListen Now
MTD Magazine A…eu
MTD Magazine, 2026 March Edition!

Listen to some of the best stories of the March 2026 edition of the MTDCNC magazine! If you’re seeking unparalleled insights into the world of machining and manufacturing, look no further than MTD Magazine. We offer distinctive content that sets us apart. Our magazine is not only a compelling read but also a captivating listen. Explore our articles, or tune in to our audiobook for a comprehensive experience.

MTDCNC Podcast…uk
Paul Zajac, Starrag – B2B Podcast

“You never give up on an order.” For Starrag’s Paul Zajac, that mindset has shaped a career spanning five decades – from shopfloor machining to global sales. The role might look polished from the outside. In reality, it’s built on pressure, persistence, and relationships earned over time. From navigating global disruptions like COVID to seeing the industry adapt and push forward, his perspective is clear – this industry is still a space full of opportunity, especially for the next generation coming in. Tune in with MTDCNC’s Paul Jones to hear about the deals, the industry shifts, and the realities of

EPListen Now
MTDCNC Podcast…as
Stop Paying Too Much Per Hole: Modular Drilling, Swiss Tricks & a Global Kennametal Giveaway

Most shops focus on tool price. The real cost lies in what happens over time. In today’s podcast, Arthur Field of MTDCNC sits down with Keith Hoover of Kennametal to break down why cost per hole is the metric that actually drives profitability. There’s no complicated math – just a conversation packed with practical insights to help you reduce costs, improve performance, and make smarter tooling decisions. And if that’s not enough, there’s also a chance to win tooling in Kennametal’s global Machinist of the Year giveaway! If you’re looking to boost productivity and save money, this is one you

EP331
MTDCNC Podcast…eu
MACH 2026: The countdown has begun!

The UK’s premier manufacturing event is nearly here. Why does it matter? “They’re showing kit that’s never been shown before in the UK.” Organised by the Manufacturing Technologies Association (MTA), MACH brings together the latest machine tools, automation technologies, and tooling innovations under one roof. With live machinery, specialist knowledge hubs, and thousands of visitors expected, it’s a chance for engineers, buyers, and students to explore the future of manufacturing in one place. Learn more in this special episode of the MTDCNC Podcast with our very own Joe Reynolds and MTA’s James Fudge.

EP330
MTDCNC Podcast…na
Is gear finishing about to change again?

“Their brand-new skive finishing process is shaking up the global gear industry…” Liebherr’s latest innovations are doing exactly that – from Skive Finishing to dresser-independent profile technology and Flex Chamfer. In this MTDCNC podcast, Scott Yoders of Liebherr explains how these technologies are helping manufacturers achieve greater flexibility, faster changeovers, and improved productivity in modern gear production.

EP329
MTDCNC Podcast…uk
Have you seen their transformation in just two years?

When MTDCNC’s Tom Skubala last visited Brown & Holmes (Derby) Ltd, there were four people on the shop floor. Today? Nineteen and growing fast. With in-house PCB capability, vertical storage, expanded build space and major investment backing, they’ve evolved into a safety-critical electronics partner for aerospace, naval and defence. Now they’re developing their own counter-UAV technology. Tune in to hear Mike share how smart investment, tighter control, and bold thinking are accelerating their next chapter.

EP238
MTDCNC Podcast…na
What makes this year’s Student Summit unmissable?

It’s a launchpad for thousands of students discovering high-tech, high-impact, and highly lucrative careers. In this powerful episode of the MTDCNC Podcast, Catherine Ross joins Arthur Field to explain why the IMTS 2026 Student Summit isn’t just another event. From 15,000+ students engaging hands-on with robotics and automation to real job pathways, internships, and career connections, this is where inspiration turns into opportunity. If the industry is serious about closing the skills gap, this is where the action starts. As Catherine puts it, “Careers in manufacturing can disrupt generations of financial struggles…” The question is – will we show up

EP237
MTDCNC Podcast…na
Star-SU: 100 years of people, precision and motion

“They don’t just sell tools. They help the world turn, literally.” Behind every precision gear is a human story worth hearing. This is the real story behind nearly a century of family-led manufacturing at Star-SU, shared by Jeffrey Lawton on the latest MTDCNC Podcast. From generational leadership and global growth to resilience, risk-taking, and people-first values, this conversation explores what it truly takes to last in manufacturing: a powerful reminder that progress comes from craftsmanship, relationships, and never losing sight of the human side of industry.

S236
MTDCNC Podcast…eu
Sodick Germany: Why EDM performance isn’t just about the machine

“Everything you touch daily has probably been through an EDM process.” From machine technology to the wire itself, Sodick is obsessed with getting more out of EDM. In this behind-the-scenes podcast, MTDCNC’s Paul Jones sits down with the Sodick Germany team to talk partnerships, performance, and why wire matters more than most shops realise. The conversation explores how wire choice, machine capability, and close collaboration are helping shops unlock performance they didn’t realise was already there. If you’re serious about pushing EDM further – faster cuts, better results, and smarter use of your machines – this is a conversation worth

MTD Magazine A…eu
MTD Magazine, 2026 January Edition!

Listen to some of the best stories of the January 2026 edition of the MTDCNC magazine! If you’re seeking unparalleled insights into the world of machining and manufacturing, look no further than MTD Magazine. We offer distinctive content that sets us apart. Our magazine is not only a compelling read but also a captivating listen. Explore our articles, or tune in to our audiobook for a comprehensive experience.

EP236
MTDCNC Podcast…eu
Quick Quotes & Six Workshop Expansions: G23 Engineering’s Fast Growth with PSL Datatrack

Running a subcontract precision engineering business takes more than machines – it takes control, clarity and the right systems. In this MTDCNC Podcast, host Tom Skubala sits down with Geoff Gartland, Managing Director of PSL Datatrack, and Adam Green, owner of G23 Engineering Limited, to revisit a 10-year journey from an £11k cowshed startup to a thriving machine shop. Adam shares how he: PSL Datatrack’s production control software helped G23: Adam calls PSL Datatrack a gamechanger: simple, powerful and built for engineers – helping G23 present themselves as a larger, professional operation while freeing Adam to focus on running the

EP235
MTDCNC Podcast…na
How fast can your machine builder get you running again?

You know you’ve got the right partner when uptime is built into their entire service philosophy! That’s what Starrag is all about. In today’s podcast, MTDCNC’s Arthur Field talks with Rob and Steven of Starrag about how their team classifies parts, manages everything through their ERP system, and ships critical replacements straight from their Kentucky warehouse. From a flooded vertical turning center to modernizing a 1970s machine to 2025 standards, their service stories are proof that Starrag keeps customers’ machines running. Tune in to learn how smart stocking, global technician coordination, and precise ticket tracking help Starrag react fast when

EP232
MTDCNC Podcast…na
What’s the difference between a supplier and a partner?

They don’t just sell a machine and drop it on your shop floor — Starrag runs the entire journey as a full project. In this MTDCNC podcast, Arthur Field sits down with Udo and John of Starrag to unpack how the company delivers almost 24/7 cross-continental project management, structured kick-off meetings, and deep technical support. With around 70% of their North American business in defence and ITAR and over 70 machines supporting programs like the F-35, Starrag brings the engineering strength to handle everything from tooling and turnkey programming to massive foundations. Tune in to learn how Starrag becomes a

EP231
MTDCNC Podcast…eu
The only oil-mist system that recovers your cutting fluid?!

What if your oil-mist system didn’t just trap oil — but actually separated it and sent it back to your machine? In this podcast, MTDCNC’s Paul Jones sits down with Brad Eicher of 3Nine, the company using centrifugal disk-stack technology born from the milk-processing industry to achieve 99.9% separation down to one micron. The result? Customers recover 50 to 200 millilitres of cutting fluid per hour and often save two to four barrels a year, with HEPA filters lasting up to 18,000 hours. With over 18,000 units installed and a completely different approach from traditional multi-filter systems, 3Nine is proving

EP230
MTDCNC Podcast…uk
They’re taking global power to the Americas!

What does it take to introduce a globally recognised manufacturing powerhouse to the U.S. market? MTDCNC’s Arthur Field sits down with industry veterans Andy and Armando from LK Machinery to talk bold ideas, brand-building, and the culture that’s driving their success. From 20,000-ton Giga Press installations to powerhouse partnerships with industry leaders like Rego-Fix, this conversation dives into the innovation and ambition shaping LK Machinery’s journey across the Americas. Tune in for real talk, big machines, and even bigger challenges!

EP229
MTDCNC Podcast…na
They’re bringing BIG updates to the North American market!

From compact series machines and powerful five-axis platforms to the revolutionary Matrix Tool Magazine holding up to 828 tools, Starrag is delivering complete solutions for the shop floor. MTDCNC’s Arthur Field sits down with Udo Herbes and Jim Stolo at Starrag’s Kentucky HQ to unpack everything new for the North American market: RCS CAM software, more hands-on factory training for service techs, expanded support across North America and Mexico, and more. If you’ve ever wondered what it takes to keep high-end manufacturing ahead of the curve, this MTDCNC podcast with Starrag is one you can’t miss! Interested in hearing some

EP228
MTDCNC Podcast…eu
More Quotes, More Growth, Less Admin: How PSL Datatrack Transformed Newtech

Running a successful subcontract precision engineering business isn’t just about investing in machines – it’s about having the right systems in place. In this MTDCNC Podcast, host Colin Griffiths sits down with Geoff Gartland, Managing Director of PSL Datatrack and Alan Riley, Owner of Newtech High Speed Turning Limited. Alan shares his journey of finally taking the plunge with PSL Datatrack in 2017 – and why he now calls it a “godsend” for his business. What once felt like a leap turned out to be a simple, cost-effective decision that transformed the way Newtech operates: Alan admits he wishes he’d

EP227
MTDCNC Podcast…na
Simpler setups, tougher grades, and a $4,000 tooling prize? Yes please.

Steel, stainless, or high-temp alloys—what if you didn’t need a dozen insert grades to cover it all? In this MTDCNC Podcast, Greg Sage of Kennametal joins MTDCNC’s Arthur Field to reveal why the KCP25C, KCU, and KCS10B turning grades are reshaping how job shops approach productivity. From edge-holding coatings that stay sharp under pressure to inserts built for longer life and consistent performance, it’s all about cutting costs while keeping the spindle turning. Oh, and stick around—because Kennametal is giving away a custom $4,000 toolbox packed with holders, inserts, and even a voucher for more tooling!

S226
MTDCNC Podcast…eu
How does a conveyor go from raw material to full turnkey product?

Cromar builds swarf conveyors, coolant filtration, mist extraction — anything that surrounds a machine tool. A family business spanning generations with a focus on mastery, their systems are scalable, traceable, and backed by responsive engineering and service teams. Join Tom Skubala of MTDCNC as he chats with Ben from Cromar to see how they manage orders for conveyors from start to finish, why a skilled workforce is still beneficial in today’s era of automation, and what they’re doing to prepare the next generation of machinists.

EP225
MTDCNC Podcast…eu
EMO Catch Up: Cutting-Edge Tech, Crazy Parties & The Future of Manufacturing!

Join the MTDCNC team as we recap our unforgettable week at EMO 2025. One of the world’s biggest manufacturing and engineering trade shows! From 25,000 daily steps on the show floor to late-night industry parties, we cover it all! In this episode, we discuss: ➢The latest breakthroughs in automation, 3D printing, and CNC control systems➢Insights on global manufacturing trends and visitor attendance➢Wild behind-the-scenes stories (including one unexpected sausage incident 😅)➢A look ahead at humanoid robots and the future of AI-driven machine shops Whether you’re a machinist, engineer, or tech enthusiast, this EMO Washdown is your backstage pass to innovation, hard

EP224
MTDCNC Podcast…eu
Have you seen the latest breakthroughs across their four powerhouse machines?

Whether it’s fabrication, turning, or ultra-compact precision work, ETG is helping shops manufacture smarter, faster, and more flexibly. Advancements across Durma, Quaser, Nakamura-Tome, and Mitsubishi machines are all about slashing cycle times while keeping skilled operators in control. From AI-enhanced Durma lasers and V-model Nakamura upgrades to the flexible Quaser Flex and precision Mitsubishi EDMs, productivity and efficiency are moving fast. Join Paul Jones of MTDCNC and Steve Brown of ETG in a special podcast to see how these new developments are transforming the UK manufacturing landscape.

EP5
MTDCNC Podcast…uk
UNCUT at MJ Engineering – EMO Insights, Autumn Events & Summer Highlights!

In this month’s episode of MTDCNC UNCUT, we’re on location at MJ Engineering in Leicestershire! Join Lyndsey, Paul, and Joe as they catch up after a busy summer, sharing stories and highlights from the past few months. We dive into what’s coming up at EMO and look ahead to a packed events calendar across the UK in October and November. As always, expect plenty of laughs, industry insights, and some unexpected moments – including a special guest appearance from David at MJ Engineering.

EP223
MTDCNC Podcast…uk
The ‘sleeping giant’ of UK manufacturing is on a transformation journey!

Customers are noticing, partners are lining up, and the future looks massive. Mitsubishi Materials is back—and they’re making waves! MTDCNC’s Rowan Easter-Robinson sits down with Tim Rose, Melanie Drayton, and Jason Purcell of Mitsubishi Materials to talk two years into a three-year transformation journey. From smarter solutions and carbide recycling to game-changing 24-hour delivery, Mitsubishi Materials is proving that expertise, speed, and innovation can change the manufacturing game. Tune in to learn more about their business transformation and what customers can expect from Mitsubishi Materials today. This podcast is brought to you by MTDCNC – your go-to platform for the

EP7
MTDCNC Podcast…eu
B2B Edition – 30 years strong, and it’s all about the people behind the tech!

One thing that distinguishes machining enthusiasts from other people is that “they can see inside the product.” In this special on-site episode of the B2B Podcast filmed in the Czech Republic, Paul Jones of MTDCNC sits down with Pavel Diviš of TGS at their 5-Axis Fair to talk about 30 years of growing a machining business through a post-socialist transition, technological shifts, and the changing landscape of European industry. From building skateboards as a kid to becoming a full-solution provider for high-end manufacturing projects, Pavel shares what it takes to adapt, innovate, and lead with vision. This isn’t just another

EP222
MTDCNC Podcast…eu
Jota Advanced Engineering’s Growth Fuelled By PSL Datatrack & AvISO

In this episode of the MTDCNC Podcast, host Rowan Easter-Robinson is joined by three influential leaders to explore the incredible growth journey of Jota Advanced Engineering Ltd – and the critical roles of PSL Datatrack and AvISO in powering their transformation: From humble beginnings with just 4 machines and some spreadsheets, Jota has grown into a state-of-the-art precision engineering firm with 17 CNC machines – and they’re only just getting started. This conversation unpacks how strategic investment in systems and standards laid the foundation for that success: Also learn how ISO 9001, implemented by AvISO, helped Jota: Whether you’re a

EP220
MTDCNC Podcast…
Is 3D printing ready for full-scale production?

Additive manufacturing is no longer just for prototyping — it’s powering real, scalable manufacturing. Lyndsey Vickers of MTDCNC sits down at Midlands 3D’s Open House with Paul Moloney of Midlands 3D and Joe Bellis and Jon Porter of Matsuura to unpack how additive is shifting from niche to necessity across the manufacturing landscape. This podcast explores the tipping point of the past 18 months: shifting from single parts to hundreds, how trust in the tech is rising, and why Midlands 3D’s clean, modern facility proves they’re playing in the big leagues. Whether you’re a buyer, supplier, or user — this

MTDCNC Podcast…
LIVE, UK manufacturing debate, how’s the industry for you!!

Join the discussion as Paul hosts Lee Scott from Starrag live in the studio this afternoon. They’ll be talking through some of the biggest stories that have broken in recent weeks and months — all pointing to encouraging growth across UK manufacturing.But with all this investment, how much of the actual machining will take place here in the UK? That’s one of the key questions we’re all eager to get answers to.From aerospace and defence to motorsport, renewables, and nuclear, Paul and Lee explore where the opportunities really are — and what still needs to change.Have your say – join the conversation, leave a comment,

EP221
MTDCNC Podcast…eu
Built in Barnsley, trusted worldwide. This factory proves UK manufacturing isn’t dead!

From flat sheet to final assembly, LNS UK’s Barnsley facility is a powerhouse of precision engineering. In this episode of the MTDCNC podcast, Rowan Easter-Robinson takes you inside a working factory where over 200 bespoke swarf conveyors are produced each month — not in the Far East, but proudly in Yorkshire. Tim Hardcastle of LNS shares why UK-made matters, how LNS is serving OEMs and end users across Europe, and how smart in-house design and quality control are helping this facility stay ahead in a competitive global market. Listen in to hear how they’re blending tradition with tech, solving coolant

EP220
MTDCNC Podcast…uk
The changeover revolution in bar feed that turns hours to minutes!

Tired of wasting hours on machine changeovers? You’re not alone. In this episode of the MTDCNC Podcast, Rowan Easter-Robinson comes down to the South Coast to talk about one of the biggest time-thieves in machining: bar feeder changeovers. We’re talking to none other than seasoned engineer Tony Faccini of LNS – a company that’s producing conveyors shipped all across the UK and Europe! This is a deep dive into a world-first bar feeder innovation that’s turning heads across UK machine shops. From faster cycle times to fully automated, self-adjusting channels that go from 6mm to 32mm at the press of

EP219
MTDCNC Podcast…eu
Everything about this CAD/CAM technology is built to boost your productivity!

From 5-axis pioneering to AI-driven manufacturing, this is 25 years of CAM innovation with hyperMILL. What began with a small reseller network and a bold idea has evolved into one of the most advanced CAD/CAM software providers in the world. On the latest MTDCNC Podcast, Adrian and Ken from OPEN MIND Technologies UK share their journey—from their early days in 5-axis machining to the cutting-edge hyperMILL and its game-changing Virtual Machine technology. Offering optimised NC simulation with real-time problem solving, seamless integration, and everything from simple 2.5D to complex 5-axis and mill-turn – there’s no doubt that the feature-rich hyperMILL

EP218
MTDCNC Podcast…eu
Subcontractors Boost Efficiency & Profits with PSL Datatrack Production Control Software

In this episode of the MTDCNC Podcast, PSL Datatrack’s Managing Director Geoff Gartland joins Colin Griffiths to discuss the real-world challenges faced by subcontract precision engineers – and how PSL Datatrack helps solve them. From quoting in seconds to eliminating spreadsheet chaos, PSL Datatrack’s modular production control software empowers manufacturers to streamline operations, cut administration time and grow without increasing overheads. Whether you’re a one-man band or a business with 100+ employees, PSL Datatrack offers scalable, proven software tailored to your exact needs – without the cost or risk of going bespoke. With intelligent scheduling, powerful status boards, AI-powered training

EP217
MTDCNC Podcast…uk
Behind the scenes of a thriving precision engineering success.

What’s it really like to run a family business and stay ahead in today’s competitive manufacturing world? This episode dives into the powerful partnership between Birds Precision and Sodick—driving innovation and growth in UK manufacturing. Join Lyndsey Vickers of MTDCNC on the road at Birds Precision, as she chats with Managing Director Thomas Bird and Sodick’s Greg Capp and Richard Bailey. From humble beginnings to a thriving precision engineering business with a healthy 12-week order book, Tom shares how they’re tackling workforce challenges, automation, and why investing in cutting-edge tech and making engineering cool again is essential. Flexibility and smart

EP216
MTDCNC Podcast…uk
Why chip management matters more than you think!

Swarf management – not the sexiest topic, but one of the most overlooked essentials in modern machining. In this episode of the MTDCNC Podcast, Nathan Phelan from LNS joins Rowan Easter-Robinson of MTDCNC on the factory floor in Barnsley to break down what swarf really is, why it’s such a pain to manage, and how LNS’s filtration conveyors are saving manufacturers serious time and money. Learn how swarf builds up in coolant tanks, why filtration matters, and the difference between hinge belts and drum conveyors.Hear Nathan’s journey from building studies to 20+ years in engineering.Get a behind-the-scenes feel of the

EP4
MTDCNC Podcast…uk
Just Clean That Car!! Is Brexit BACK? How Does Germany Do What We Can’t?

Dirty cars, dirty minds, barbecue tools, Indian trade, German investment strategy, Brexit talk… and guess who just turned 50!? 🎉 In this latest episode of the MTDCNC Uncut Podcast, it’s just the three — Lyndsey, Joe, and Paul — catching up on all things MTDCNC, recent travels, behind-the-scenes insights, and plenty of industry gossip. Expect unfiltered opinions, off-the-cuff laughs, and real talk from the team — with a big birthday celebration thrown in for good measure! 🎂 👇 Tune in for: ✅ Manufacturing & engineering gossip ✅ Global trade and investment talk ✅ Day-to-day team insights ✅ Big banter and

EP215
MTDCNC Podcast…uk
Understanding career progression in the machine moving industry with Jason Temple

Working his way up to Logistics Director, the story of Jason Temple from Flegg Projects is absolutely inspiring!! It’s not always about the machine tools, it’s the people behind the technology that make sure the right person is on the right job at the right time. That’s what Jason does in his role at Flegg Projects, and we get to find out more in this special MTDCNC Podcast with Tom Skubala of MTDCNC. Flegg Projects move millions of pounds worth of equipment, and what goes into performing such challenging tasks is unreal. Tune in for more detailed insight into working

EP214
MTDCNC Podcast…uk
Beyond coolant – solving problems with proof!

For a company like Oemeta, it all comes down to the data and what they can prove before they make the sale! Oemeta are helping customers improve performance on the shop floor by providing data-driven fluid management solutions. Where did the Oemeta journey begin and how are they so confident about what they do to solve customers’ problems? In today’s MTDCNC Podcast, Tom Skubala of MTDCNC takes a seat with Louisa Johns and Ryan of Oemeta to learn more! If you want a coolant supplier that really listens to its customers, Oemeta just might be the solution you need! This

EP212
MTDCNC Podcast…uk
From Lorry Driver to Operations Director: Adam’s Journey with Flegg Projects

Operations is all about wearing multiple hats — and Adam’s career proves it! Starting out as a lorry driver in 1998, Adam has worked his way up to become Operations Director at Flegg Projects, a company renowned for their expertise in machinery moving. But it’s not just about relocating heavy kit. Behind every move is a meticulous process involving health and safety, staff training, damage prevention, and precision logistics. Join MTDCNC’s Chloe Reeve as she sits down with Adam for an inspiring conversation about his career journey and the intricate world of machinery moving — and discover how Flegg Projects

EP211
MTDCNC Podcast…uk
From quoting to customer visits – business development is shaping the industry!

What’s it like to work on the business development side of manufacturing? Let’s find out from Alex Hodgson of Alcon Precision Engineering! Holding a genuine passion for manufacturing and design, 27-year-old Alex is helping to change the business internally to expand and scale. Whether it’s visiting customers, quoting, or talking to engineers about machines, Alex plays a key role in moving Alcon Precision Engineering in a fantastic direction. Tune in for today’s MTDCNC Podcast with host Lyndsey Vickers as we get to learn more about Alex, his experience in the industry, and why he believes it’s important for manufacturers to

EP209
MTDCNC Podcast…eu
There’s a lot more to vending machines than you might know.

Hoffmann Group have installed hundreds of vending machines for customers, and they’ve never done the same type of install twice! What are some of the benefits that come with Hoffmann Group’s vending solutions? Walk and wait time reductions, automatic stock refills, improved traceability, and real-time reporting are just some of the major advantages of having your own customised machine. These products are designed for increased efficiencies and greater time savings in your business. In today’s podcast, Tom Skubala of MTDCNC invites Michael Warwick of Hoffmann Group to learn how their vending machines truly make life easier for everyone on the

EP208
MTDCNC Podcast…eu
From shop floor to industry leader: What it takes to build a successful machine shop

Starting with a small team of two to now having fifty-one people, R&G Precision has seen some phenomenal growth over the years. What are some of the tough decisions they’ve had to make and how did they power through the highs and lows of running a machine shop? Who better to share all this insight than Managing Director Enzo Chiarelli of R&G Precision! Tune in to an inspiring podcast hosted by Lyndsey Vickers of MTDCNC and hear how Enzo went from learning at the shop floor level and making tea to implementing automation and lights out running with investments in

EP207
MTDCNC Podcast…eu
With A Guaranteed Savings Plan Like this, It’s A No Brainer!

Tom Skubala is joined by Simon Ashworth and Paul Walker from Hoffmann UK to discuss the range of benefits of using their GSP program, Guaranteed Savings Plan. The UK has struggled for decades to improve manufacturing efficiency, with countless companies pouring excessive time and resources into indirect purchasing pricing actions. At Hoffmann Group UK, they’ll partner with you to uncover significant material savings opportunities that will boost productivity and drive efficiency throughout your business. This isn’t just a promise – it’s a guarantee! Their expert team will work alongside yours, side by side, to deliver real, measurable savings. All they

EP206
MTDCNC Podcast…eu
Aerospace sales leader talks precision, innovation, and machine performance!

Starrag UK has a new Aerospace Sales Manager – and he’s well positioned to help people get the most out of their machines! Simon Dutton of Starrag brings a wealth of knowledge and experience in machine tool sales as well as through various technical roles across an extensive career. In today’s MTDCNC Podcast, Paul Jones of MTDCNC connects with Simon to understand what it’s like to work with the exceptional teams at Starrag from across their multiple manufacturing plants and to dive into the detail and accuracy that goes into one of the world’s leading machine tools. Watch the full

EP205
MTDCNC Podcast…eu
Flexible inventory management tailored to suit your shop floor

Inventory management systems include more than just vending machines – Hoffmann Group UK offer a diverse range of solutions for your machine shop! Compared to a rigid vending machine that sits like a box on your shop floor, Hoffman Group’s inventory management systems are extremely flexible and can go literally anywhere in your facility to offer automatic stock control, data monitoring, and management of consumables. That means more efficiency in procurement and supply as well as cost savings! Tune in with MTDCNC’s Tom Skubala in a special podcast with Michael Warwick of Hoffmann Group as they uncover the benefits of

EP204
MTDCNC Podcast…eu
Machines designed for three-shift running flat out!!

These cost savings will make you want to invest in a BBT 30 Brother machine from Whitehouse Machine Tools! How capable are these machines and why should BT 40 users and general machinists be looking at this technology? If your goal is speed, efficiency, and unbelievable cycle time reductions, this is the technology that can truly grow your business. That’s not just our opinion, we’ve got the expert Peter Smith of Whitehouse Machine Tools to give us all the insights on the benefits of powerful Brother technology, the common misconceptions in the market, and the ability for these machines to

EP203
MTDCNC Podcast…eu
When it comes to sliding head technology, the only limit is your imagination!

How have sliding head machines evolved over the years and what benefits do they offer to the UK manufacturing sector? Who better to ask than Mark Anson of Dugard?! Mark brings a profound experience in cutting tools and sliding head lathes, giving him the edge to share remarkable insights from the early days of the technology to the more refined and more capable equipment it is today. Take a seat with Paul Jones of MTDCNC in this exciting conversation as Mark talks about the advantages of sliding head technology, quick and more accurate one-hit machining, and getting more out of

EP202
MTDCNC Podcast…uk
Improve efficiencies and reduce costs with tailored inventory management solutions

How can you be more efficient in your company? With these tailored solutions from the Hoffmann Group, you can improve efficiencies by up to 40%!! Better stock control, reduced costs, and improved operations – there’s no one else on the market offering this type of service. MTDCNC’s Tom Skubala brings in the expert Shaun Holmes of Hoffmann Group for a deep dive into how they ensure customers use the right product for the right job in the right manner! If you’ve got any pain points in your business and would like to benefit from massive cost reductions, get in touch

EP201
MTDCNC Podcast…uk
Marketing Hacks for Manufacturers 2025: What You Need to Know

In this podcast, Lyndsey Vickers is joined by some of the team from MTDCNC to explore how social media and marketing will evolve in 2025. They share essential hacks, services, and strategies manufacturers should embrace to maximise their marketing budget this year. The discussion covers SEO, email marketing, website development, AI, social media, YouTube, print advertising, and much more. Tune in for a fascinating insight into how marketing is changing and how manufacturers can stay ahead in 2025

EP200
MTDCNC Podcast…eu
They haven’t had anyone leave for 15 years!!

MicroLoc is a name well-known in the industry, and we’re about to find out how this accurate and repeatable workholding system all started. MTDCNC’s Tom Skubala invites Sales Director Matt Jenness of Micron Workholding for a deep dive into the past, present, and the future of the versatile MicroLoc system. Holding a large amount of raw material in stock and delivering tailor-made base plates to suit your machine, this UK based manufacturer can create your workholding system in the shortest time possible! Tune in for an interesting podcast to learn about all the technology, options and efficiencies you can benefit

EP1
MTDCNC Podcast…uk
So what did you miss in 2024!!

The team have assembled for the first time in 2025 to discuss all the cool stuff they saw and enjoyed in 2024. With over 300 videos shot during the 12 months, dozens of factory tours in Europe and the UK, exhibitions galore and more machine shops than you can think of visited during the year, what were the highlights and what may you have missed. A terrific round up focused on this occasion on Europe and UK.. Enjoy!!

S198 - EP1
MTDCNC Podcast…uk
The brand-new workholding portfolio from 1st MTA

Modular, cost-effective, and flexible – the new Sinco workholding product portfolio from 1st MTA can really transform your machine shop. In today’s brilliant podcast lined up, MTDCNC’s Giovanni Albanese invites the experts from 1st Machine Tool Accessories to understand the unique benefits and innovative applications of these products. You can get started with an on-site consultation and demo from 1st MTA to see for yourself! If you’re looking to improve your manufacturing facility and even add some fantastic automation solutions, tune in to this special MTDCNC podcast sponsored by Langley Alloys to learn more.

EP197
MTDCNC Podcast…uk
After Dark ‘MTDCNC’ – Social media, the good, the bad and the ugly!!

In this LIVE episode, Tom Skubula speaks with Paul and Joe about the impact Social media is having on our industry and not just our industry, but life in general. We’re broadcasting live from our studio in Burton Latimer discussing the changes and impacts social media is having on our lives. Feel free to contribute to the discussion and hear the guys be completely candid about their experiences, their thoughts and their expectations for social media in the future. We discuss YouTube, LinkedIn, X, Facebook, Instagram and Tik Tok.

EP196
MTDCNC Podcast…uk
You can’t keep scaling chaos – automation is the key!

What’s it like to run a machine shop in 2024? Who better to answer that question than JWA Tooling and Whitehouse Machine Tools! Lyndsey Vickers of MTDCNC hosts an exciting podcast with Pete Wood and Tim Shillabeer of JWA Tooling and Anthony Biggs of Whitehouse Machine Tools for a deep dive into the manufacturing space, the rise of AI, and the incredible efficiency gains from Brother machines. If you want to know how you can make things quicker, use less floorspace and keep energy costs down, this conversation is for you. Learn more in this special MTDCNC podcast sponsored by

EP195
MTDCNC Podcast…uk
A versatile workholding solution that lends itself to all applications!

Limitless possibilities for improved efficiency, reduced setup time, and greater profitability – Chick workholding offers some insane benefits for any engineer. Who better to explain how this system works than the experts from 1st Machine Tool Accessories: Tim, Lee, and Richard! MTDCNC’s Giovanni Albanese hosts a special MTD Podcast to uncover the real advantages and savings that Chick workholding can offer when it comes to productivity challenges in the machine shop. This is a solution you absolutely need to know about if you want to experience an unbelievable ROI. Join the conversation to find out how you can maximise production

EP194
MTDCNC Podcast…uk
How is this company helping UK manufactures become more efficient?

The UK is the 8th largest in the world in terms of manufacturing yet the sector is struggling – fortunately, companies like the Hoffmann Group can help!! Whether it’s the global skills shortage, increasing competition, investment barriers, or the flow-on effects of Brexit, UK manufacturing has some significant challenges to solve. Join MTDCNC’s Tom Skubala and Tim Paddison of the Hoffmann Group as they address the solutions for greater efficiency, increased productivity, lower price per part, and attracting a young workforce while reducing the overall costs of doing business. Tune in to this special MTD podcast sponsored by Langley Alloys

EP193
MTDCNC Podcast…eu
Close the skills gap and maximise your profit with this leading consultancy!

Skills shortage coupled with a lack of investment is a major problem for many engineering companies. Fortunately, Acquired Precision Consultancy is helping businesses address these challenges by making every job as profitable as possible!! Whether you’re looking to invest in a new machine or much-needed process automation, a shortage of skills and staff can hold you back. Tune in for a special MTDCNC Podcast where Acquired Precision Consultancy’s Wayne talks to MTDCNC’s Paul Jones about maximising profit and efficiency to move your business forward! With Wayne’s twenty years’ experience working with top tier Formula One teams and subcontract companies, the

EP192
MTDCNC Podcast…eu
PSL Datatrack Increases Profitability For ADP Precision

In this episode, Colin Griffiths of MTDCNC interviews Geoff Gartland, Managing Director of PSL Datatrack, alongside Anthony Ingledew, Peter Cornish and Steve Cross from ADP Precision Engineering Limited, a company celebrating its 25th anniversary. Discover how PSL Datatrack production control software has revolutionised ADP’s operations, transforming it into a more efficient and successful subcontract precision engineering company. Key points include: The shift from cumbersome, paper-based systems to streamlined, centralised processes with PSL Datatrack. How ADP has improved on-time deliveries, now achieving 97-98% accuracy. The role of PSL Datatrack in simplifying quoting and cost analysis, making non-profitable jobs easier to identify

EP4
AMB 2024eu
AMB 2024 – Cutting Edge Technology?

The MTDCNC team discuss more technology that will be on show at AMB 2024; Use your free visitor code – ’24AMBMTA100′And as a special treat – Thursday 12 September at 12pm – UK Happy Hour, with Fish and Chips.

EP191
MTDCNC Podcast…uk
Have you seen what you can achieve with this high speed machining centre?

This Sodick machine from Sodi-Tech is built for some of the highest-level work you can achieve!! On today’s MTDCNC Podcast, Paul Jones of MTDCNC interviews Conor Plaskitt of Sodi-Tech to learn where the UX 450 high speed milling machine sits in the market. If you’re after impeccable surface finishes, higher accuracy, and complete reliability for top-tier applications, this machine is for you! Tune in to find out more about the many capabilities of a 7-tonne machine that offers greater accessibility and a heavy-duty casting for a truly phenomenal high-end quality product. The MTDCNC Podcast is sponsored by Langley Alloys –

EP3
AMB 2024eu
AMB 2024 – More technology dicussed.

In the next episode of the AMB 2024 podcast series the MTDCNC team talk through more of the technology that will be on show from; Book Tickethttps://www.messe-stuttgart.de/amb/en/ Use your free visitor code – ’24AMBMTA100′And as a special treat – Thursday 12 September at 12pm – UK Happy Hour, with Fish and Chips.

EP2
AMB 2024eu
AMB – What technology will you see at the show?

Lyndsey Vickers has a chat with some of the MTDCNC Team to find out about some of the technlogy you will see at AMB 2024. Exhibitors include; But what will they be showcasing?Find out more in the latest AMB 2024 podcast. To Visit AMB;Book here.Use your free visitor code – ’24AMBMTA100′ And as a special treat – Thursday 12 September at 12pm – UK Happy Hour, with Fish and Chips.

EP1
AMB 2024eu
AMB – Coming Soon but what can you expect?

AMB is upon us again; doesn’t seem like 2 years since our last visit.Once again the MTDCNC Team will be there to film a range of the latest technology and showcase this to a global audience.Our clients are making a huge investment in attending the show and having MTDCNC join them to film their technology not only enables people who couldn’t attend the show a chance to see the latest in the world of engineering, it also enables our customers to be seen by a global audience.In this podcast Lyndsey Vickers hosts the show to discuss what we can expect

EP190
MTDCNC Podcast…as
Spinner is leading the industry by example! | Spinner Open House 2024

“Automation is not to replace the workers we have, it’s to replace the workers we don’t have!” Salim Elías Awad, President of Spinner North America, dives into world-class technology, exceptional customer service, and the impact of automation on the industry. In conversation with Lyndsey Vickers of MTDCNC, Salim demonstrates Spinner’s expertise in being more than just a machine on the shop floor – they make sure the machine gives the customers the return they’re looking for! Tune in to this MTDCNC podcast from Spinner’s Open House 2024 and learn more about where Spinner is placed in the industry. The MTDCNC

EP189
MTDCNC Podcast…uk
Transformed Production: The PSL Datatrack Impact At DP Engineering

Join Colin Griffiths of MTDCNC as he hosts an insightful discussion with Geoff Gartland, Managing Director of PSL Datatrack, and Phillip Anthony, Sales & Marketing Director of DP Engineering. Discover how PSL Datatrack became and remains become the heartbeat of DP Engineering, streamlining their entire production process from quotation to invoice. Key points include: The crucial role of PSL Datatrack in ensuring seamless operations at DP Engineering How accurate quoting is the starting point of success The efficiency gained from linked modules and rapid quote generation The significant impact of the Job Costing module on profitability insights The transition to

S1 - EP188
MTDCNC Podcast…eu
Leader CNC Technologies’ brand-new cutting-edge facility and exclusive brands!

Leader CNC Technologies have a brand-new facility built from the ground up – and some seriously exciting times ahead! We’re talking machines and technology you won’t normally see in anyone’s showroom, including some door-opening brands like FFG DMC, Takumi, and Milltronics! In today’s vodcast, MTDCNC’s Lyndsey Vickers is with James Leet of Leader CNC Technologies to learn more about their expansion into the market, their incredible service and support, and their upcoming customer-focused open house events. Ready to learn about some other fantastic brands such as Maple, Gruppo Parpas, JTEKT, Shibaura Machine, Nomura, FAT HACO, and Fermat? Stay tuned for

EP187
MTDCNC Podcast…eu
Fabricated – Or is this just made up?

Fabrication, particularly tube bending is a process that is not widely known about. But not any more if you listen to MTD’s latest podcast. In this episode Rowan Easter-Robinson talks with Andrew Smith-Hughes from ETG UK & Ireland about their newest department, Fabrication. We find out about processes and applications that their range of machines can undertake, including the manufacture of hand rails, automotive and much much more; even components for Ferraris. And we do of course need to mention the podcast sponsors, Langley Alloys – a big thank you to them for their support.

EP186
MTDCNC Podcast…eu
MTDCNC Podcast – Get traceability with Colchester Machine Tools

On this weeks MTDCNC Podcast Rowan Easter-Robinson talks with Paul Buckley from Colchester Machine tools. Talking in depth about laser systems with Colchester Machine tools new laser engraver machine which offers a new solution to a different area of engineering. Designed and manufactured by Colchester machine tools, it helps a range of industries including aerospace, motorsport and so many more. With engraving serial numbers, logos or anything that is needed for traceability, it gives Colchester a new reach into the market. Listen to find out more!

EP185
MTDCNC Podcast…eu
WALTER EWAG – World-Class CNC Grinders and Inspection Technology

In this episode of the MTDCNC Podcast, Joe Reynolds sits down with Philip Morris and Achim Schurius of Walter EWAG to discuss their world-class CNC grinding and measurement technologies. The Podcast was produced at the Walter EWAG Open House and they showcased the HELITRONIC MINI PLUS and G200 grinders as well as the HELICHECK ADVANCED inspection machine .

EP184
MTDCNC Podcast…eu
With the level of technology today, there’s no reason why the UK can’t compete with other countries!

Where do we, as a nation, stand in the global manufacturing sector? Fasten your seat belts because we’re about to spill the beans on 2023 UK manufacturing statistics for the good, the bad, and everything in between. As the 8th largest manufacturer in the world and 6th largest economy with the manufacturing sector accounting for 9.3% of total economic output, the UK makes some fantastic products – but there’s certainly room for improvement when it comes to precision machining more products on shore. Be a part of this interesting discussion with MTDCNC’s Paul Jones and Starrag’s Lee Scott, who brings

EP183
MTDCNC Podcast…uk
3 weeks until MACH 2024

Paul, Joe and Gio take time out to discuss what their looking forward to at the up and coming MACH 2024 event. With a busy 5 days at the show these guys will be unearthing all the latest technology that’s going to be showcased by some of the UK’s leading suppliers at the event.

EP180
MTDCNC Podcast…uk
MACH 2024 – Get Yourself There

MACH 2024 is getting nearer; 15 – 19 April at the NEC in Birmingham.The MTD team discuss some of the things you will expect to see, but in a nutshell, get yourself there! Register For The Event – https://www.machexhibition.com/visitor-registration/

EP179
MTDCNC Podcast…uk
Parts out the door fast or parts out correctly? Sodick’s new Wire EDM offers the best of both worlds!

Combining high-end technology with an aggressive price point, the VN Series Wire EDM can go in any manufacturing facility with guaranteed accuracy for the life of the machine. Tune in to this week’s MTDCNC Podcast sponsored by Langley Alloys to hear more from Conor Plaskitt and Greg Capp of Sodi-Tech. Learn why this spectacular machine offers ultimate reliability and flexibility with minimum downtime, 30% energy savings, and world-class programming capability. Seeing is believing – so come on down to Sodick Europe for demos, test cuts, and more!

EP177
MTDCNC Podcast…uk
What’s Behind the Success of the Southern Manufacturing and Electronics Show?

Join Gio from MTDCNC and Phil Valentine, the founder of Southern Manufacturing and Electronics, in a fascinating discussion about the evolution and significance of the UK’s largest manufacturing exhibition. Discover Phil’s journey from his initial sales and marketing roles to creating groundbreaking manufacturing shows across the UK. Learn about the pivotal moments in the show’s history, including its inception in 1993 and the challenges faced, such as unexpected snowstorms during the first event. Phil shares insights on the show’s exponential growth, the importance of face-to-face interactions in the industry, and the serendipity of exhibitions. Giovanni highlights the digital transformation in

EP175
MTDCNC Podcast…uk
2023 round up for Colchester Machine Tools

MTDCNC’s Chloe Reeve is joined by Jonathan Wright to review a phenomenal year for Colchester Machine Tool Solutions! Chloe and Jonathan discuss Colchester Machine Tool Solutions’ TWO most recent new machine releases – the return of the Colchester Tornado and the Storm VMC. And that’s not all….. Watch now to learn more about Colchester Machine Tool Solutions’ hugely successful Open House and their exciting plans for the Bridgeport brand! Watch/listen on YouTube: 2023 round up for Colchester Machine Tools. – YouTube The MTDCNC podcast is sponsored by Langley Alloys.

EP174
MTDCNC Podcast…uk
Growth At Bedford CNC Powered By Production Control Software

When MTD first met Andy from Bedford CNC he only had a few relatively old machines in a small machine shop. But, with his passion, drive and determination, oh, and some help from PSL Datatrack things have moved on a bit..We discuss what has happened and how some great Production Control Software has taken him to where he is now, new machines in a new machine shop.

EP172
MTDCNC Podcast…uk
Bullet-proof precision manufacturing for Factory 33 with Hexagon’s EDGECAM software

In business since 2016, fast-growing Factory 33 use EDGECAM to make some fascinating quality components for Formula 1 and Formula E teams – and we’re about to find out how at the Hexagon User Group Event held at the Seco Tech Center. In today’s MTDCNC Podcast, Rowan Easter-Robinson invites Marcin Kryzwina of Factory 33 and Gareth Henwood of Hexagon to understand how Factory 33 tackle jobs, produce repeatable and one-off parts quickly, and consistently deliver to customers on time. From designing and manufacturing parts for medical and motorsport to reverse engineering, Factory 33 use the robust and seamless EDGECAM for

EP171
MTDCNC Podcast…uk
Star GB Open House – But When Is It?

Paul and Lyndsey discuss the latest Star GB Open House. Some great new technology will be on show and MTD will be streaming live as well. But what are the milling capabilities like on these machines? Are these a great way to automate? Should you invest in a slider? Have a listen to find out more.

EP3
MTDCNC Podcast…uk
EMO Hannover Insights – Future of Connectivity – International Podcast 3

More from EMO 2023 with Dr Wilfred Schafer Last in the series of EMO 2023 International Podcasts (Number 3), we are joined by Dr. Wilfred Schafer from VDW in Germany together with Tony Gunn from MTD over in the US. This time we talk The Future of Connectivity! What does a modern machine shop look like, connected to 5G or private networks? Data is the new oil, but how does it help you. Find out more from Dr Schafer and the MTD Team.

EP1
MTDCNC Podcast…uk
Unlocking Success: Transforming Workplaces with Hoffmann Group UK

In the ever-evolving landscape of modern industries, optimising workplaces for safety, efficiency, procurement, and innovation has become crucial. Join us in this enlightening podcast episode as we delve into the realm of Hoffmann Group UK – the driving force behind workplace revolutions. Discover how Hoffmann Group’s state-of-the-art products, spanning cutting-edge safety gear to ergonomic tools, are reshaping industries and propelling businesses toward unparalleled success. Tune in to explore real-life stories, expert insights, and the impactful journey of turning ordinary workplaces into extraordinary hubs of productivity and inspiration. If you’re prepared to embrace a new era of workplace efficiency, this podcast

S1 - EP169
MTDCNC Podcast…uk
Keeping the machine tool industry moving

Moving a machine tool or a complete factory from one location to another can be daunting and without risk. Fortunately, Flegg Projects are a trusted partner in the industry that can transport or install equipment safely, efficiently, and without damaging your precious investments! In this week’s MTD Podcast, Giovanni Albanese of MTDCNC interviews Sales Director and Board Member Mark Marshall of Flegg Projects for insight on their decades of specialist knowledge, investments in young people, and their aim to offer peace of mind for customers. There’s more than what meets the eye when it comes to moving around machine tools

EP1
MTDCNC Podcast…uk
The best event for subcontract and general engineering companies to exhibit at

James Fudge of the MTA joins Paul and Lyndsey in the MTD studio to discuss the exciting engineering supply chain show happening alongside MACH 2024. With no other dedicated ‘UK’ manufacturing supply chain show this event is bound to excite engineering companies up and down to land to exhibit their capabilities and capacities. But be quick if you want to reserve a space as availability is short due to demand.

EP166
MTDCNC Podcast…uk
Why is it so important for manufacturers to adopt ERP solutions like QAD?

Traditional and outdated process management can impede business growth, efficiency, and profitability. Fortunately, QAD can help manufacturers scale and stay competitive in today’s fast-paced and often volatile industry! Experts Peter and Linda of QAD join MTDCNC’s Rowan and Giovanni in an exclusive podcast to explore the benefits of ERP solutions as well as the risks for companies who choose to stick to traditional management of their workshops. Backed by over 20 years of industry experience and purpose-built for manufacturing companies, QAD systemizes workflows, simplifies knowledge transfer, and gives you complete control of your business and supply chain through a single

EP165
MTDCNC Podcast…uk
Diving into Hainbuch UK

Today David and Jacob from Hainbuch UK traveled to the MTDCNC office to show off a new Quick point system for round work holding. The guys also spoke about what is likes to work for a German company, uk manufacturing and also the apprentice program.

Find out More

What MTDCNC can do for you

Your partner for marketing, media, and events in manufacturing.

Join Thousands of Professionals Staying Ahead with MTD

Sign up to receive the latest videos, insights, and exclusive content from the world of manufacturing

Let's Get You Connected

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    We use cookies on our website to give you the most relevant experience. By continuing you agree to our use of cookies.