Polstore CNC Trolley – Make your CNC tools mobile

If you’re looking to safely move your heave CNC Tooling around the workshop, in between production cells or from a pre-set area to machine we have a simple, low cost and effective storage solution – The CNC tool trolley.

The cnc tool trolley is an integral part of our NC Storage and Transport System. There are a number of options depending on the quantity of tools to be stored.
We offer 2 size options with different load capacities – 300kg, 400kg or 800kg safe working load (SWL).

The entry level trolley 765 wide x 508 deep x 880 mm high covering 300-400kg SWL arrives flat packed with instructions and requires a 45min assembly.
The main trolley housing made from steel includes a useful side shelf with rubber mat, push pull handle and 2 swivel braked/ 2 fixed castors (100mm = 300kg SWL or 150mm = 400kg).

The trolley sides are slotted in 25mm increments so fitting the tool frame and tool cradles to suit the tool size & capacity is simple and adjustable.
The tool frame bolts to the top of the trolley frame and the tool cradles locate into the angle or horizontal supports – these are adjustable, tool size dependent.
To make life easier you can purchase standard set ups.

If you require a higher load capacity and a substantial increase in tool storage capacity, our larger model is ideal.
The trolley sides and base are welded giving it a massive 800kg SWL. Overall size is 1080 wide x 692 deep x 970mm high which includes 200mm diameter rubber castors.
Again, the same frame and tool cradle system applies except the tool frame is 4 rows rather than 3 rows.

As with all Polstore storage solutions it’s all about maximising the density of tool storage.
The design of our tool holders allows you to create rows of tools minimising the gap in between each tool.
The tool holder is secured to the frame / cradle with a bolt and threaded plate.

For example, our 30-10100 entry level tool trolley has a maximum tool storage capacity of:

35 no. ISO/BT/SK 50 tools
56 no. HSK 63 tools
56 no. ISO/BT/SK 40 tools
49 no. CAPTO C6 tools

And the 30-10400 tool trolley has a maximum tool storage capacity of:

50 no. ISO/BT/SK 50 tools
60 no. HSK 63 tools
80 no. ISO/BT/SK 40 tools
70 no. CAPTO C6 tools

Other cnc tool trolley accessories include adjustable shelves, document holders, protection bars and vertical tool storage supports.